AC + DC Power Sources

Showing the single result

APS-1102A

OVERVIEW & SPECIFICATION

  • 5.7″ Large LCD Display
  •  Output Capacity: 1kVA(for AC 200V Input)
  •  Output Modes: AC and AC+DC Combined with any of four signal sources
  •  Signal Source: Internal(INT),External(EXT),Internal+External(ADD) and Synchronization(SYNC)
  •  Arbitrary Waveform Power Output
  •  Power Amplifier of External Signal
  •  Measurement Functions: Voltage, Current, Power ,Frequency, Power Factor,CF,and Harmonic Current
  •  Capacitor Input Load Supported
  •  Sequence Function Allows Programming of Output Patterns
  •  Limiter Function ( Upper / Lower / Limit Function)
  •  30 sets of Save / Recall Memory
  •  Output On / Off Switch
  •  USB(USBTMC)and RS-232 Standard for Remote Control
  •  PC Software (Including Data Logging)
MODEL APS-1102A(AC + DC)
Maximum Output Capacity
AC  (Input) 750VA  (100 ~ 180V)
1000VA  (180 ~ 250V)
DC  (Input) 750W  (100 ~ 180V)
1000W (180 ~ 250V)
Output Voltage
AC 0.0V ~ 155.0Vrms (100V)
0.0V ~ 310.0Vrms (200V)
DC “-220.0V ~ +220.0V (100V)
“-440.0V ~ +440.0V (200V)
Output Max. Current
AC 10A (100V)
5A (200V)
DC 10A (100V)
5A (200V)
Output Maximum Peak Current
Output Maximum Peak Current 40Apk  (100V)
20Apk (200V)
Frequency
Setting Range 1.0Hz ~ 550.0Hz
Setting Accuracy ±100ppm(23±5℃)
Waveform
Output Voltage Distortion 0.5% MAX(50Hz / 60Hz)
Line Voltage Regulation
0.2% Maximum,Power input voltage  100V /120V/230V , no load, rated output
Load Voltage Regulation
0.5% Maximum,At output terminal under no load and rated resistance load
Measurement
Range(AC+DC) Resolution Accuracy(AC+DC), At DC 40~550Hz
Frequency Counter 1.0Hz ~ 550.0Hz 0.1 Hz ±100ppm(1Hz ~ 500Hz, 23±5°C)
RMS Voltage-Meter Full Scale 100V : 250.0Vrms 0.1Vrms ±0.7% of rdg+0.9Vrms (at  23±5°C)
Full Scale 200V : 500.0Vrms 0.1Vrms ±0.7% of rdg+1.8Vrms (at  23±5°C)
RMS Amp-Meter Full Scale 15.00Arms 0.01Arms ±0.7% of rdg+0.08Arms (at  23±5°C)
Wattage Meter Full Scale 1200W 1W ±3% of rdg+12W (at  23±5°C)
Load Power Factor 0.00 ~ 1.0 0.01 N/A
Load Crest Factor 0.00 ~ 50.00 0.01 N/A
Frequency Measurement 38.0 ~ 525.0Hz 0.1Hz ±0.2Hz(at  23±5°C)
phase When Output Is On 0.0 ~ 359.9 0.1 N/A
External Signal Input
Gain Setting Range 100V range 0 ~ 220 times 0.1 ±5%(DC or 45Hz to 65Hz)
200V range 0 ~ 440 times 0.1 ±5%(DC or 45Hz to 65Hz)
Output Mode ACINT Mode  :   AC+DC-INT Mode   AC – ADD Mode     AC+DC – ADD Mode  AC-EXT Mode  : AC+DC-EXT Mode  AC – SYNC Mode   AC+DC – SYNC Mode
General Specification
Memory Save / Recall 30 sets
Power Source AC100V ~ 230V ± 10% ; 50Hz / 60Hz±2Hz
Power Consumption / Factor 1.4kVA max / 0.95min (AC100V) ; 0.9min(AC200V)
Interface USB & RS232 Standard
Dimension(WxHxD) & weight 258 x 176 x 440; Approx. 9.7kg
AC + DC Power SourcesAC Power Sources