Non-Programmable & Single Channel DC Power Supplies

Showing all 4 results

PPH-1503D

OVERVIEW & SPECIFICATION

  • Dual Channel DC Power Output
  •  Ch1: 45W (0~15V/0~3A or 0~9V/0~5A) / Ch2: 18W (0~12V/0~1.5A)
  •  3.5 inch TFT LCD Display
  •  Built-in DVM Measurement Function
  •  High Measurement Resolution (1mV/0.1μA for 5mA Range)
  •  Current Sink Function (Maximum : 3.5A)
  •  Pulse Current Measurement
  •  Long Integration Current Measurement
  •  Sequence Function (Sequential power output)
  •  Built-in Battery Simulation Function
  •  OVP, OCP, OTP & Temperature Display for Heat Sink
  •  Support USB (Device& Host)/GPIB/LAN
  •  5 Groups of Save/Recall Setting
  •  External RELAY Control
Brand GWInstek
Model PPH-1503D
OUTPUT  RATING
Number of output channel ch1 ch2
Voltage 0 ~ 15V 0 ~ 12V
Current 0 ~ 5A (9V) 0 ~ 1.5A
0 ~ 3A (15V)
Power 45W 18W
Output Voltage Rising Time 0.20ms (10% ~ 90%)
Output Voltage Falling Time 0.30ms (90% ~ 10%)
STABILITY
Voltage 0.01%+3.0mV
Current NA
REGULATION (CV)
Load 0.01%+2mV
Line 0.5mV
REGULATION (CC)
Load 0.01%+1mA
Line 0.5mA
RIPPLE & NOISE (20Hz ~ 20MHz)
CV p-p 8mV 8mV
CV rms 3mV 3mV
CC rms NA NA
PROGRAMMING ACCURACY
Voltage 0.05%+10mV 0.05%+3mV
Current (1.5A & 5A) 0.16%+5mA 0.16%+2mA
Current (500mA) 0.16%+0.5mA NA
Current (5mA) 0.16%+5uA
READBACK ACCURACY
Voltage 0.05%+3mV 0.03%+3mV
Current (1.5A & 5A) 0.2%+400uA 0.2%+400uA
Current (500mA) 0.2%+100uA NA
Current (5mA) 0.2%+1uA 0.2%+1uA
RESPONSE TIME
Transient Response Time 1000% Load Chang
< 40uS (<100mV, Rear)
< 50uS (<100mV, Front)
< 80uS (< 20mV)
PROGRAMMING RESOLUTION
Voltage 1mV
Current  0.5mA(1.5A & 5A) 0.5mA(1.5A)
Current  0.05mA(500mA) NA
Current  0.5uA(5mA)
READBACK RESOLUTION
Voltage 1mV
Current   0.1mA( 5A Range) 0.1mA( 1.5A Range)
Current  0.01mA ( 500mA Range) NA
Current   0.1uA( 5mA Range) 0.1uA( 5mA Range)
PROTECTION FUNCTION
OVP Accuracy CH1:0.8V CH2:50mV
DVM
DC Readback Accuracy ( 23℃± 5℃) NA 0.05%+3mV
Readbck Resolution 1mV
Input Voltage range 0 ~ 20VDC
Maximum Input Voltage  -3V, +22V
Input Resistance and Capacitance 20MΩ
Programmable output resistance
Range  1 mΩ to +1 Ω
Programming accuracy   0.5% + 10 mΩ
Resolution  1mΩ
PULSE CURRENT MEASUREMENT
TRIGGER LEVEL 5mA ~ 5A, 5mA/step 5mA ~ 1.5A, 5mA/step
HIGH TIME/LOW TIME/AVERAGE TIME 33.3us to 833ms, 33.3us/step
TRIGGER DELAY 0 ~ 100ms,10us/steps
AVERAGE READINGS 1 ~ 100
LONG INTEGRATION PULSE TIMEOUT 1S ~ 63S
LONG INTEGRATION MEASUREMENT TIME 850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO
time 16.7ms/steps(60Hz), 20ms/steps(50Hz)
LONG INTEGRATION TRIGGER MODE Rising, Falling, Neither
OTHERS
Output  Terminal Front / Rear Panel  Rear Panel
DVM Input NA Front Panel
RELAY CONTROL CONNECTOR 150mA/15V ,100mA/5V(inter power)
Operation temperature 0 ~ 40°C
Operation Humidity ≤ 80%
Storage Temperature -20˚C ~ 70˚C
Storage Humidity < 80%
PC REMOTE INTERFACES
(Standard) GPIB / USB / LAN
CURRENT SINK CAPACITY
Sink Current Rating CH1:3.5A(Vout≦4V);3.5A-0.25*(Vout-4)(Vout>4V) CH2:2A(Vout≦5V);2A-0.1*(Vout-5)(Vout>5V)
Memory
Save / Recall 5 Sets
Power
Input Power 90-264VAC ; 50/60Hz
POWER CONSUMPTION 160W
DIMENSIONS & WEIGHT
Dimensions 222(W) x 86(H) x 363(D) mm
Weight Approx 4.5Kg
Category: