OVERVIEW & SPECIFICATION
- 3.5” color LCD
-
5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)
-
Consecutive test frequency
-
Basic accuracy : 0.05%
-
Measuring speed up to 25ms (max.)
-
Full frequency range or spot OPEN/SHORT
-
16 major/secondary parameter measurement combinations and two additional monitoring parameters(maximum four different parameters can be shown simultaneously)
-
DCR measurement and internal D.C. bias voltage (±2.5V)
-
PASS/FAIL judgment
-
Auto Level Control (ALC) function
-
BIN function provides 9BIN and 1AUX, totally 10 BIN
-
10 steps listed tests to select different frequency, voltage and current criteria
-
Standard interface : RS-232C, Handler and USB storage
-
Compact size, ideal for automatic equipment (2U,1/2 RACK)
| TEST FREQUENCY | |
| LCR-6300: 10Hz～300kHz(±0.01%) (4 digits resolution) LCR-6200: 10Hz～200kHz(±0.01%) (4 digits resolution) LCR-6100: 10Hz～100kHz(±0.01%) (4 digits resolution) LCR-6020: 10Hz～ 20kHz(±0.01%) (4 digits resolution) LCR-6002: 10Hz～ 2kHz(±0.01%) (4 digits resolution) |
|
| OUTPUT IMPEDANCE | |
| 30Ω / 50Ω / 100Ω selectable | |
| BASIC ACCURACY | |
| Slow / Med | 0.05% |
| Fast | 0.1% |
| TEST SPEED | |
| FAST:25ms / MED:100ms / SLOW:333ms | |
| TEST SIGNAL LEVELS | |
| AC Voltage | 10.00mV- 2.00V (±10%) CV :10.00mV- 2.00V(±6%) |
| Current | 100.0uA- 20.00mA (±10%) CC :100.0uA- 20.00mA(±6%) (@2VMax) |
| DCR | ±1V(2Vpp), Square wave, 3Hz up 0.033A(Max) |
| DC BIAS | |
| Internal | ±2.5V (0.5%+0.005V) |
| DISPLAYRANGE | |
| R, X, |Z|
G, B, |Y| L C D Q θd θr DCR Δ% |
0.00001Ω ~ 99.9999MΩ
0.01nS ~ 999.999S 0.00001uH ~ 9999.99H 0.00001pF ~ 9999.99mF 0.00001 ~ 9.99999 0.00001 ~ 99999.9 -179.999° ~ 179.999° -3.14159 ~ 3.14159 0.00001Ω ~ 99.9999MΩ -99999% ~ 99999% |
| TEST MODE | |
| 16 Combinations | Cs-Rs, Cs-D, Cp-Rp, Cp-D, Lp-Rp, Lp-Q, Ls-Rs, Ls-Q, Rs-Q, Rp-Q, R-X, Z-θr, Z-θd, Z-D, Z-Q, DCR |
| Monitor parameter (2 selectable) | Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R, X, G, B, Y |
| LISTED MODE | |
| 10 steps | |
| BIN FUNCTION | |
| Comparator (9BIN,AUX:1BIN) | |
| MEMORY | |
| INT – panel setting | 10 file name |
| INT – measured data | 10000 Data(.csv) |
| USB storage | 10 file name for setting, 9999 file name for data, 999 Log file for LCD screen |
| OTHER FUNCTION | |
| Auto Level Control (ALC) | ON/OFF |
| Average | 1~256 times |
| Trigger | INT / MAN / EXT / BUS |
| Delay | 0ms~60s |
| Judgment | PASS / FAIL |
| Auto LCZ | ON / OFF |
| Screen Capture | Saving in to USB (Bmp form) |
| DISPLAY | |
| 3.5’LCD, RGB color (320×240) | |
| INTERFACE | |
| RS-232(SCPI), Handler, USB Host | |
| POWER SOURCE | |
| AC 90V-250V, 50-60Hz, Max. 30VA | |
| DIMENSION & WEIGHT | |
| 265(W)x107(H)x312(D) mm, Approx.3kg | |
LCR-6000 Series
OVERVIEW & SPECIFICATION
- 3.5” color LCD
-
5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)
-
Consecutive test frequency
-
Basic accuracy : 0.05%
-
Measuring speed up to 25ms (max.)
-
Full frequency range or spot OPEN/SHORT
-
16 major/secondary parameter measurement combinations and two additional monitoring parameters(maximum four different parameters can be shown simultaneously)
-
DCR measurement and internal D.C. bias voltage (±2.5V)
-
PASS/FAIL judgment
-
Auto Level Control (ALC) function
-
BIN function provides 9BIN and 1AUX, totally 10 BIN
-
10 steps listed tests to select different frequency, voltage and current criteria
-
Standard interface : RS-232C, Handler and USB storage
-
Compact size, ideal for automatic equipment (2U,1/2 RACK)
| TEST FREQUENCY | |
| LCR-6300: 10Hz～300kHz(±0.01%) (4 digits resolution) LCR-6200: 10Hz～200kHz(±0.01%) (4 digits resolution) LCR-6100: 10Hz～100kHz(±0.01%) (4 digits resolution) LCR-6020: 10Hz～ 20kHz(±0.01%) (4 digits resolution) LCR-6002: 10Hz～ 2kHz(±0.01%) (4 digits resolution) |
|
| OUTPUT IMPEDANCE | |
| 30Ω / 50Ω / 100Ω selectable | |
| BASIC ACCURACY | |
| Slow / Med | 0.05% |
| Fast | 0.1% |
| TEST SPEED | |
| FAST:25ms / MED:100ms / SLOW:333ms | |
| TEST SIGNAL LEVELS | |
| AC Voltage | 10.00mV- 2.00V (±10%) CV :10.00mV- 2.00V(±6%) |
| Current | 100.0uA- 20.00mA (±10%) CC :100.0uA- 20.00mA(±6%) (@2VMax) |
| DCR | ±1V(2Vpp), Square wave, 3Hz up 0.033A(Max) |
| DC BIAS | |
| Internal | ±2.5V (0.5%+0.005V) |
| DISPLAYRANGE | |
| R, X, |Z|
G, B, |Y| L C D Q θd θr DCR Δ% |
0.00001Ω ~ 99.9999MΩ
0.01nS ~ 999.999S 0.00001uH ~ 9999.99H 0.00001pF ~ 9999.99mF 0.00001 ~ 9.99999 0.00001 ~ 99999.9 -179.999° ~ 179.999° -3.14159 ~ 3.14159 0.00001Ω ~ 99.9999MΩ -99999% ~ 99999% |
| TEST MODE | |
| 16 Combinations | Cs-Rs, Cs-D, Cp-Rp, Cp-D, Lp-Rp, Lp-Q, Ls-Rs, Ls-Q, Rs-Q, Rp-Q, R-X, Z-θr, Z-θd, Z-D, Z-Q, DCR |
| Monitor parameter (2 selectable) | Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R, X, G, B, Y |
| LISTED MODE | |
| 10 steps | |
| BIN FUNCTION | |
| Comparator (9BIN,AUX:1BIN) | |
| MEMORY | |
| INT – panel setting | 10 file name |
| INT – measured data | 10000 Data(.csv) |
| USB storage | 10 file name for setting, 9999 file name for data, 999 Log file for LCD screen |
| OTHER FUNCTION | |
| Auto Level Control (ALC) | ON/OFF |
| Average | 1~256 times |
| Trigger | INT / MAN / EXT / BUS |
| Delay | 0ms~60s |
| Judgment | PASS / FAIL |
| Auto LCZ | ON / OFF |
| Screen Capture | Saving in to USB (Bmp form) |
| DISPLAY | |
| 3.5’LCD, RGB color (320×240) | |
| INTERFACE | |
| RS-232(SCPI), Handler, USB Host | |
| POWER SOURCE | |
| AC 90V-250V, 50-60Hz, Max. 30VA | |
| DIMENSION & WEIGHT | |
| 265(W)x107(H)x312(D) mm, Approx.3kg | |
Benchtop LCR MetersLCR Meters
- AC + DC Power Sources
- AC Power Source
- AC Power Sources
- Benchtop LCR Meters
- DC Electronic Loads
- DC Power Supplies
- Handheld LCR Meters
- Handheld Oscilloscopes
- LCR Meters
- Leakage Current Testers
- Multiplex Scanner Box
- Non-Programmable & Multiple Channel
- Non-Programmable & Single Channel DC Power Supplies
- Oscilloscopes
- Programmable & Single Channel DC Power Supplies
- Real-Time & Digital Storage
- Safety Testers
- Safety Testers (Hi-Pot Tester)
